Free Delivery Over £60 Spend

  • Shop

Home / CO2 Equipment / CO2 Kits
product review overlay image
Aquarium Co2 Set up Kit from Aquarium Gardens
Aquarium Co2 Set up Kit from Aquarium Gardens
Aquarium Co2 Set up Kit from Aquarium Gardens
Aquarium Co2 Set up Kit from Aquarium Gardens
Aquarium Co2 Set up Kit from Aquarium Gardens

Product Description

CO2 Art Pro-SE regulator with solenoid, and the best CO2 accessories. 

Dual stage design minimise increase in output pressure as pressure drops in gas cylinder and will prevent end-tank-dump keeping your aquarium livestock safe and CO2 levels constant.

This kit will come with everything you need to start injecting CO2 into your aquarium.

Regulator is fully compatible with most EU and UK standard CO2 cylinders with DIN477 Connection. (bottle not included)

Products included in this System :

  • Pro-SE Regulator and solenoid
  • Diffuser - 3 models to choose from
  • Integrated Bubble Counter
  • CO2 Drop Checker and Indicator Fluid
  • 3m of CO2 Resistant Tubing


Recommend diffuser size:
Twinstar Small - Up to 50L
Twinstar Medium - Up to 100L
Twinstar Large - Up to 200L
Flux Small - Up to 250L
Flux Large - Up to 400L


Useful Information:
CO2 Setup Guide

Pro-SE Series Regulator at a Glance

A - CO2 cylinder connection nut
B - Working pressure adjustment knob
C - High pressure / CO2 cylinder pressure gauge (displays the amount of CO2 in your cylinder). Please note, for most of the time pressure will be at level of 700-900PSI as CO2 is in liquid state. When gauge will start to drop, that means liquid gas has evaporated and you have from couple hours to couple of days left to change the cylinder (depending on your bubble rate).
D - Low pressure / working pressure gauge
E - Bubble counter with integrated check valve
F - Gas flow (bubble rate) adjustments precision needle valve
G - Solenoid valve compatible with most pH controllers and electric timers

Step 1 | Washer Installation

Place washer between CO2 cylinder outlet and regulator's stem (inside regulator's nut)

Step 2 | Tighten the regulator

Tighten the regulator to your CO2 cylinder using a spanner or wrench

Step 3 | Bubble counter installation

A - Remove top cap and fill bubble counter with water*
B - Feed tubing through the collar and install cap back onto the bubble counter (detailed bubble counter tutorial)
*We do not recommend mineral oil as it may contaminate your diffuser.

Step 4 | Pressurising the regulator

A - Open main CO2 cylinder valve
B - Adjust working pressure to desire level* by turning front knob clockwise
1 - Reactors 10-20PSI*
2 - Ceramic and Basic diffusers 20-30PSI*
3 - High pressure atomizers (inline & bazooka) 30-40PSI*

Step 5 | Fine tuning bubble rate

A - Plug the solenoid into a power outlet socket
B - Start turning the needle valve anticlockwise to achieve the desired bubble rate.
Please allow 5-30seconds for pressure to stabilise between adjustments.
Monitor your bubble rate for the first two days and fine tune to achieve desire flow.
Do not adjust the flow right after solenoid is powered up. Please wait at least 30minutes before further adjustments. 
After each regulator installation, follow steps from below video to make sure your system is leak-proof.
 

Specifications

Product Code
1009

Customer reviews

(12 Customer reviews)
Write A Review
5 Stars
100%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%

Showing 1 to 5 (13).

Complete system well nearly

Good solid regulator I’m not a complete novice regards to Co2 last had a planted aquarium some 15+ years ago, I’m using the in-line 16/22 diffuser the fine mist is hardly noticeable, I ordered afterwards the in line check valve as I noticed water creeping very close towards the bubble counter when switched off, I’m not sure if it would have got in to the bubble counter but better to be safe than sorry.

Howard Kent | Worcester | February 2023

Excellent help in deciding requirements and also where to source refillable Co2 cylinder from

Nigel Debney | Swindon | February 2021

No Regrets!

I set up an aquascape more than 18 months ago, which did not work out well, by month 12 algae had taken over, and killing my plants, so I did my research and decided now was the time to take my aquarium up a lever or two, and opted for Co2.

Initially i was put off by how technical it all seems, but once you get your head around it, its absolutely a breeze to do, and I set up this kit within minutes, though i will admit that i almost pressed the fire extinguisher handle until I noticed the two plastic washers that need to be put into place to ensure an air tight fit, well the one washer, other is a spare apparently =)

I will admit, I watched a very educational video by Mr Farmer over on some video social media platform, which helped me out a lot, I think without initially watching the video before buying the equipment, I would not have been so convinced that it would be so easy to install, but it is, even a numpty like me can do it.

And I swear that I can see new growth on my Rotala's already, on day 3!!!

Now, just waiting for those twinstars to come back in stock =)

Robyn | Wisbech | February 2021

9.5/10

This product seems to be excellent value, easy to install, looks really good and feels like it has a high build quality. The customer service/delivery from AG was also very good too. The only slight criticism that I have is that the item didn't come with any suction cups for the CO2 piping, so I've had to order them separately and incur additional charges.

Chris | South Wiltshire | January 2021

a company you can trust

what can i say, my dealing with this company is nothing less then fantastic, the care and support shown couldent be beat, the unit i received is fantastic, well built and so easy to use, the company even found me a co2 supplier in scotland, will order with them over and over with confidence

brian nicholls | scotland | August 2020

Showing 1 to 5 (13). Page 1 of 3.

123
Next

CO2 Art Pro-SE regulator with solenoid, and the best CO2 accessories. 

Dual stage design minimise increase in output pressure as pressure drops in gas cylinder and will prevent end-tank-dump keeping your aquarium livestock safe and CO2 levels constant.

This kit will come with everything you need to start injecting CO2 into your aquarium.

Regulator is fully compatible with most EU and UK standard CO2 cylinders with DIN477 Connection. (bottle not included)

Products included in this System :

  • Pro-SE Regulator and solenoid
  • Diffuser - 3 models to choose from
  • Integrated Bubble Counter
  • CO2 Drop Checker and Indicator Fluid
  • 3m of CO2 Resistant Tubing


Recommend diffuser size:
Twinstar Small - Up to 50L
Twinstar Medium - Up to 100L
Twinstar Large - Up to 200L
Flux Small - Up to 250L
Flux Large - Up to 400L


Useful Information:
CO2 Setup Guide

Pro-SE Series Regulator at a Glance

A - CO2 cylinder connection nut
B - Working pressure adjustment knob
C - High pressure / CO2 cylinder pressure gauge (displays the amount of CO2 in your cylinder). Please note, for most of the time pressure will be at level of 700-900PSI as CO2 is in liquid state. When gauge will start to drop, that means liquid gas has evaporated and you have from couple hours to couple of days left to change the cylinder (depending on your bubble rate).
D - Low pressure / working pressure gauge
E - Bubble counter with integrated check valve
F - Gas flow (bubble rate) adjustments precision needle valve
G - Solenoid valve compatible with most pH controllers and electric timers

Step 1 | Washer Installation

Place washer between CO2 cylinder outlet and regulator's stem (inside regulator's nut)

Step 2 | Tighten the regulator

Tighten the regulator to your CO2 cylinder using a spanner or wrench

Step 3 | Bubble counter installation

A - Remove top cap and fill bubble counter with water*
B - Feed tubing through the collar and install cap back onto the bubble counter (detailed bubble counter tutorial)
*We do not recommend mineral oil as it may contaminate your diffuser.

Step 4 | Pressurising the regulator

A - Open main CO2 cylinder valve
B - Adjust working pressure to desire level* by turning front knob clockwise
1 - Reactors 10-20PSI*
2 - Ceramic and Basic diffusers 20-30PSI*
3 - High pressure atomizers (inline & bazooka) 30-40PSI*

Step 5 | Fine tuning bubble rate

A - Plug the solenoid into a power outlet socket
B - Start turning the needle valve anticlockwise to achieve the desired bubble rate.
Please allow 5-30seconds for pressure to stabilise between adjustments.
Monitor your bubble rate for the first two days and fine tune to achieve desire flow.
Do not adjust the flow right after solenoid is powered up. Please wait at least 30minutes before further adjustments. 
After each regulator installation, follow steps from below video to make sure your system is leak-proof.
 

(12 Customer reviews)
Write A Review
5 Stars
100%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%

Showing 1 to 5 (13).

Complete system well nearly

Good solid regulator I’m not a complete novice regards to Co2 last had a planted aquarium some 15+ years ago, I’m using the in-line 16/22 diffuser the fine mist is hardly noticeable, I ordered afterwards the in line check valve as I noticed water creeping very close towards the bubble counter when switched off, I’m not sure if it would have got in to the bubble counter but better to be safe than sorry.

Howard Kent | Worcester | February 2023

Excellent help in deciding requirements and also where to source refillable Co2 cylinder from

Nigel Debney | Swindon | February 2021

No Regrets!

I set up an aquascape more than 18 months ago, which did not work out well, by month 12 algae had taken over, and killing my plants, so I did my research and decided now was the time to take my aquarium up a lever or two, and opted for Co2.

Initially i was put off by how technical it all seems, but once you get your head around it, its absolutely a breeze to do, and I set up this kit within minutes, though i will admit that i almost pressed the fire extinguisher handle until I noticed the two plastic washers that need to be put into place to ensure an air tight fit, well the one washer, other is a spare apparently =)

I will admit, I watched a very educational video by Mr Farmer over on some video social media platform, which helped me out a lot, I think without initially watching the video before buying the equipment, I would not have been so convinced that it would be so easy to install, but it is, even a numpty like me can do it.

And I swear that I can see new growth on my Rotala's already, on day 3!!!

Now, just waiting for those twinstars to come back in stock =)

Robyn | Wisbech | February 2021

9.5/10

This product seems to be excellent value, easy to install, looks really good and feels like it has a high build quality. The customer service/delivery from AG was also very good too. The only slight criticism that I have is that the item didn't come with any suction cups for the CO2 piping, so I've had to order them separately and incur additional charges.

Chris | South Wiltshire | January 2021

a company you can trust

what can i say, my dealing with this company is nothing less then fantastic, the care and support shown couldent be beat, the unit i received is fantastic, well built and so easy to use, the company even found me a co2 supplier in scotland, will order with them over and over with confidence

brian nicholls | scotland | August 2020

Showing 1 to 5 (13). Page 1 of 3.

123
Next
Product Code
1009

12 Customer Reviews

Aquarium CO2 Art Kit Pro-SE, Complete System

Item in Stock

Product Code 1009

Low price, High quality CO2 Kit. For use with any UK standard refillable CO2 bottle.

  • Vibrant plants

    Ordered plants from here a few times and it has always been a great service. Plants are always healthy and packaged well. Excellent service and quick delivery

    Joe Dade / 23rd Jan 2025

  • Superb quality plants.

    Superb quality plants. Delivered quickly and packaged superbly. I won’t be going anywhere else to get my aquarium plants and aquascaping equipment.

    Phil Wilson / November 2024

  • Best UK Aquascaping

    Dave and the guys at Aquarium Gardens are without doubt the leaders in their field of Aquascaping. My wife and I have visited several times over the last couple of years and have always received fantastic advice and guidance. Two years ago we had one small tank, we now have three aquascapes all running CO2, this definitely wouldn’t be possible without all the support from the guys at Aquarium Gardens. Carry on doing what you’re doing because your business model is superb…..thanks once again Malcolm & Cheryl Orgill

    Malcolm Orgill / October 2024

  • Quick service, fantastic plants

    I have ordered from Aquarium Gardens for the first time after seeing them on social media. Well what can I say except WOW, the plants were a really good price, they arrived on time actually quicker than I expected! They arrived in absolutely fantastic condition as if I had picked them out myself, well packaged. The plants themselves were bigger than what I expected to get so definitely value for money and the root systems were well established, can't wait to see them get bigger in my aquariums. Will definitely buy from this company again.

    Sue Hall / 3rd Feb 2023

Our top brands
VAT Number: 202531463
© Copyright 2026   Aquarium Gardens All rights reserved